Specifications:
Operating voltage: 1.8V ~ 3.6V, recommend close to 3.6V, but not more than 3.6V (recommended 3.3V);
The maximum operating rate of 500kbps, support for 2-FSK, GFSK and MSK modulation;
High sensitivity (1.2Kbps under-110dBm, 1% packet error rate);
The built-in hardware-to-multipoint communication CRC error detection, and address control;
A lower current consumption,TX: 21.2mA at 0dBm, RX: 13.3mA at 250kbps;
Programmable control of output power, the max output rate is 0 dBm, the lowest -10dBm can be set from 1.2kbps to 500kbps;
RTC wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment
Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System
Fast frequency changes brought about by a suitable synthesizer frequency hopping systems
module can be software-based address, software programming is very convenient
Standard DIP spacing (2.54mm pitch ) interfaces for embedded applications
Separate 64-byte RX and TX data FIFO
Transmission Distance: open to the actual transmission distance 50-100 meters (depending on the specific situation of the environment and communication baud rate settings, etc. may be)
Module Size: 24mm * 15mm, Antenna length :45mm, (The antenna cannot be full directional , it is only 180 degree ) ;