I2C
LED Module for Pixhawk PX4 with USB Extension Function External Indicators Full
Color LED

 

Pixhawk
powerful self-evident, its high integrated multifunction lamp brightness RGB
full color, easy to identify the status of the flight control, compared to the
previous APM is more intuitive, is a great design. But the problem is Pixhawk
Fengyun LED upward, can only be viewed on the ground, in the air, unable to
recognize the status of the flight control, the other is surrounded by many
racks are full design, flight control, while being well-protected user can not
easily connect USB line. So we refer to the official parts design and launch of
this combo Pixhawk-RGB module functions.

 

Pixhawk-RGB
module has the following characteristics:

·
To extend to the exterior RGB LEDs to display, when connected to the module,
built-in RGB flight control automatically turns off;

•
Increase the USB port for easy links from external USB cable, without limitation
flight control installation location;

·
And Pixhawk onboard identical Toshiba LED controller and Osram's high-brightness
RGB LED

 

Instructions
for use:

The
interface flags 4P cable plug connected Pixhawk I2C part of the flight control
I2C port, if the I2C port is occupied, please use I2C Breakout Board; another
part of USB plug connected to the flight control of the USB port, you can
complete the connection; use, on-board flight control RGB light will
automatically turn off, unplug the plug is for the use of the onboard I2C RGB
again.

 

Reminder:
APM can also use this module, but you can not use a USB extension function -
only recommended Pixhawk users to choose.